manualshive.com logo in svg

Nonin 7500FO, Operator'S Manual, Page: 4 / 42

Share
Download
Nonin 7500FO Operator'S Manual Download Page 4

ii

Contents (Continued)

Analog Output Calibration..................................................................................24

Memory Features ..................................................................................................25

Clearing Patient Memory ...................................................................................25
Playing Back Memory Data ...............................................................................25

Connecting the Device into a Medical System ......................................................26

Parts and Accessories .................................................................................27

Service, Support, and Warranty ..................................................................28

Warranty................................................................................................................28

Troubleshooting ...........................................................................................29

Technical Information ..................................................................................31

Manufacturer’s Declaration ...................................................................................31

Essential Performance.......................................................................................31

Equipment Response Time ...................................................................................33
Testing Summary ..................................................................................................34

SpO

2

 Accuracy Testing .....................................................................................34

Low Perfusion Testing .......................................................................................34

Principles of Operation ..........................................................................................35
Specifications ........................................................................................................35

Summary of Contents for 7500FO











































Reviews:

No comments