Tel:+86-020-26287877 Web:www.led-floodlight.com E-mail: [email protected]
2 / 4
This unit is suitable for outdoor use.
This product is suitable for installation on surfaces with normal flammability
e.g. wood,plasterboard and masonry. It is not suitable for use on highly
flammable surfaces (e.g.polystyrene, textiles).
Before making fixing hole(s), check that there are no obstructions hidden
beneath the mounting surface such as pipes or cables.
Make sure that the fixings are strong enough to support the considerable
weight of the fitting and hold it rigidly.
The floodlight must be positioned so that there is at least 0.5m (500mm)
between the bulb and any illuminated surface. Floodlights should be
positioned well away from flammable materials.
Do not attach to surfaces which are damp,freshly painted or otherwise
electrically conductive (e.g. metallic surfaces).
This product is designed for permanent connection to fixed wiring: this must
be a suitable circuit (protected with the appropriate MCB or fuse).
When making connections ensure that the terminals are tightened securely
and that no strands of wire protrude. Check that the terminals are tightened
onto the bared conductors and not onto any insulation.
This product must be connected to an earth termination.
This product is not intended to be used by children and persons wiath
sensory, physical and/or mental impairments that would prevent them from
using it safely.
IMPORTANT - if the external flexible cable of this luminaire is damaged it
shall be exclusively replaced by a qualified engineer.
You are advised at every stage of your installation to double-check any
electrical connections you have made. After you have completed your
