Nomadix AG-2000W, User Manual, Page: 20 / 254

N
OMADIX
AG-2000
W
™ / AG-2000
WA
™
16 Introduction
Access Control
For IP-based access control, the NSE incorporates a master access control list that
checks the source (IP address) of administrator logins. A login is permitted only if a
match is made with the master list contained within the NSE. If a match is not made,
the login is denied, even if a correct login name and password are supplied.
The access control list supports up to 50 (fifty) entries in the form of a specific IP
address or range of IP addresses.
The NSE also offers access control based on the interface being used. This feature
allows administrators to block access from Telnet, Web Management, and FTP
sources.
Bandwidth Management
The NSE optimizes bandwidth by limiting bandwidth usage symmetrically or
asymmetrically on a per device (MAC address / User) basis, and manages the WAN
Link traffic to provide complete bandwidth management over the entire network. You
can ensure that every user has a quality experience by placing a bandwidth ceiling on
each device accessing the network, so every user gets a fair share of the available
bandwidth.
With the Nomadix Information and Control Console (ICC) feature enabled,
subscribers can increase or decrease their own bandwidth dynamically (by the minute,
or on an hourly, daily, weekly, or monthly basis), and also adjust the pricing plan for
their service (see graphic).
Information and Control Console (ICC)
Bandwidth selection
(pull down)