Nomadix AG-2000W, User Manual, Page: 141 / 254

N
OMADIX
AG-2000
W
™ / AG-2000
WA
™
System Administration 137
You can display up to 5 banners, but they must be defined here. Banners require
all the same parameters that “buttons” use (see “Assigning Buttons” on
page 135 ), with the addition of 3 (three) more. These are:
‹
Duration
– Defines how long the banner is displayed in the ICC.
‹
Start Time
– This is an optional parameter that you set if you want to
assign a “start” time (for when the banner is displayed).
‹
Stop Time
– This is an optional parameter that you set if you want to
assign a “stop” time (for when the displayed banner closes).
When assigning images and times for banners, refer to: “Pixel Sizes” on
page 138 and “Time Formats” on page 138 .
11.
Define the parameters for your banner(s):
‹
Name/Text
‹
Target URL
‹
Image Name
(see following note)
‹
Duration (secs)
‹
Start Time (Optional)
‹
Stop Time (Optional)
12.
If you changed any of the Image Name definitions, click on the check box for
Reboot after changes are saved?
(to reboot the AG-2000w).
13.
When finished, click on the
Submit
button to save your changes, or click on the
Reset
button if you want to reset all the values to their previous state.
14.
To return to the previous screen, click on the
Configure ICC
link.
If you assign (or change) button images or banner images, the AG-
2000w must be rebooted for your changes to take effect.