-22-
START-S19
Operating guide
Group “S”
DESCRIPTION
VALORI ACCETTATI
S 01
Logic of the control unit
1 - Rapid reversing
2 - Collective use
3 - BISTABLE
4 - Bistable with automatic reclosing
5 - Rapid Reversing + dead’s man
6 - Collective use + dead’s man
7 - Bi dead’s man
8 - Bistable with automatic re dead’s man
from 1 to 8
S 02
Activation complete cycle open and close by power fail if the gate/door was open
0 Off - 1 On
S 03
Inhibiton input FOTO A
After intervention of the LSC slowing down
0 deactivate - 1 activate
S 04
Detecting passageo
0 Off - 1 On
S 05
Activate the signal light in pause
0 Off - 1 On
S 06
Activation TEST in the inputs with activated TEST
0 Off - 1 On
S 07
Activated the reversing after detecting the passage (S04 = ON)
0 Off - 1 On
S 08
Logic of the intervention of the obstacle detection
1 - Considered as LS
2 - Considered as STOP
S 09
Activate TEST in the PHOTOCELL input
0 Off - 1 On
S 10
Activate TEST in the input SAFETY EDGE 1
0 Off - 1 On
S 11
Activated TEST in the input STOP
0 Off - 1 On
S 12
Activate fl ashing in the signal light output
0 Off - 1 On
S 13
Activate input LSO
0 Off - 1 On
S 14
Activate input LSC
0 Off - 1 On
S 15
Activate input STOP
0 Off - 1 On
S 16
Activate input PHOTO
0 Off - 1 On
S 17
Activate input SAFETY EDGE 1
0 Off - 1 On
S 18
RESET at factory’s settings
S 19
Activate rolling code
S 20
Activate input Switch slow down OPEN
0 Off - 1 On
S 21
Activate input Switch slow down CLOSE
0 Off - 1 On
S 22
Activate input SAFETY EDGE 2
0 deactivate - 1 activate
S 23
Copy settings in memory 1
S 24
Copy settings in memory 2
S 25
Remind settings in memory 1
S 26
Remind settings in memory 2
S 27
Charge standard settings 1
S 28
Charge standard settings 2
S 29
Charge standard settings 3
