-11-
START-S19
Operating guide
To save all changes it is possible to select a password of 4 numbers. To activate this function make as follow:
•
PASSWORD ACTIVATION
:
Press
P1
,
P2
and
P3
in the function
S32
and then confi rm with
P1
.
0---
•
INSERT PASSWORD
Choose the fi rst number with the buttons
P2
and
P3
then
confi rm with
P1
. The same procedure applies to the other
digits.
2.3
Set up a password for programming
P1
Access to the menu
-
t
-
P2
2nd press
-
S
-
P1 confi rm
S 01
S 32
P2
In the function
S
if you press
P1
, you can choose the group function: fi rst select
P2
, now you can go to the function
S32
and then confi rm with
P1
.
P1 - OK
S 33
•
DEACTIVATION OF THE PASSWORD
P1 - OK
If you select the fucntion no.
S33
you can cancel the password.
Wait 10 seconds to confi rm the operation.
After entering the 4 numbers. Press
P1
to confi rm. To cancel
press
P1
, within 10 seconds. Otherwise, the next access will
be required the security code.
Pay attention in case you forget
the password it is not possible to
enter in control board.
!
