77
Copyright
©
2005 Nokia. All rights reserved
.
•
Priority calls only
—The radio attempts to send position information only when
position requests from authorised numbers are received during a call to an
emergency number programmed into your radio, or during a
red key call
or a
silent
red key call
to a network mode destination. If the GPS receiver does not
get the needed information from the satellites to determine the current
coordinates before the call ends, the coordinates that were last calculated by
the receiver are sent instead.
Note that position information from the GPS receiver may be sent to the
network during these calls if it has been predefined by your organisation,
regardless of which setting is selected.
NMEA interface
If the radio is connected to a compatible PC with the DLR-3P cable, you can send
position information to compatible map applications on the PC. The protocol
NMEA-0183 version 3.0 is used for data transfer. To activate or deactivate the
GPS receiver and the sending of position information to the compatible PC, select
NMEA interface
→
On
or
Off
.
Approved NMEA sentences include GPRMC, GPVTG, GPGGA, GPGLL, GPGSA, and
GPGSV. The default data transfer rate of the NMEA interface is 4800 b/s. AT
commands cannot be used when NMEA data transfer is active.
Coordinate format
To select how the WGS-84 coordinates are displayed, select
Coordinate
format
→
ddd°mm’ss’’
,
ddd°mm.mmm’
, or
ddd.ddddd°
.
Summary of Contents for THR880i
Page 1: ...User Guide ...
