manualshive.com logo in svg

Nokia THR880i, User Manual

Share
Download
Nokia THR880i User Manual Download Page 33

33

Copyright

 ©

 2005 Nokia. All rights reserved

.

■

Loudspeaker

Your radio has a high volume loudspeaker (1) for 
hands-free use. When the loudspeaker is in use, 

 is displayed, and you can listen and speak to 

the radio from a short distance.

Warning:

 Do not hold the device near your ear 

when the loudspeaker is in use, because the volume may be extremely loud. 

When you use the earpiece, hold the radio as you would any other telephone, with 
the antenna pointed up and over your shoulder. When you use the loudspeaker, 
hold the radio approximately 10 cm (4 inches) away from your mouth, with the 
antenna pointed up and away from your face and eyes.

To activate or deactivate the loudspeaker, press 

 (2).

To activate or deactivate both the loudspeaker and the earpiece, press and hold 

 (2). If you make or receive a phone call while the earpiece is not in use, the 

earpiece is activated when the call is connected.

■

Light indicator

There is a light indicator on top of the radio. A yellow light 
indicates that you must wait before you can speak, a green light 
indicates that the radio is transmitting, and a red light indicates 
that the call or operation has failed.

Summary of Contents for THR880i






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands