RH-37
5 - Disassembly Instructions
Nokia Customer Care
Page 8
Nokia Corporation
Issue 1 07/04
When changing the Light Guide Assy use SRT-6 as a lever.
Keep in mind that Dome Sheet is glued to the Engine
Module.
Put the Engine Module into the Soldering Jig.
Use a slotted screwdriver as a lever to open the Camera
Shield.
Camera Module is attached with four double snaps into its
guidance.
Place the removal tool as shown in the picture and unlock
the snaps on both sides. Note releasing order.
Remove the Camera Module with the removal tool as
shown in the picture.
