RH-37
Company confidential
Service Software and Tuning Instructions
Nokia Customer Care
Page 40
Copyright
Nokia. All rights reserved.
Issue 1 07/04
After a successful installation, choose “Finish” to complete.
YOU CAN NOW CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER.
Connect power to JBV-1 (11-16V DC) from an external power supply, then connect the
USB cable between JBV-1 USB connector and PC.
The next step is to install or update the JBV-1 USB drivers which are delivered with the
JBV-1 SW installation package. They can be found in folder:
C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver
If there is no previously installed JBV-1 Firmware update package installed on your com-
puter, Windows will detect the connected USB cable and drivers for new HW. You will be
prompted about this, please follow the instructions and allow Windows to search and
install the best drivers available.
If there is a previously installed JBV-1 Firmware update package (v 17 or older) on your
computer, please update the JBV-1 USB Driver.
Please see the readme.txt
file under
C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver folder for instructions
on how to update the JBV-1 USB Driver.
After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update
can begin.
Go to folder
C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update
and
start JBV-1 Update SW by double clicking
fwup.exe
.
The JBV-1 Firmware update starts and shows the current status of the JBV-1 connected.
