Section 2K: Additional Features
120
7.
To review, change, or delete the voice command, press
Options
, scroll to select the action, and press
Select
.
To use voice commands:
1.
From the standby mode, press and hold the
key for two
seconds. (The key is below
Contacts
.)
2.
Speak your command after the beep. (If a voice match is found,
the phone executes the command.)
Selecting Radio Stations
You can use the automatic tuning feature to scan for available local
stations, you can program specific stations into your radio, or you
can change stations using voice commands.
To scan for stations:
1.
From the standby mode, press
Menu
, scroll to
Radio
, and
press
Select
.
2.
Press
Options
, scroll to
Automatic tuning
, and press
Select
.
3.
Press
or
. (The radio will scan up or down in frequency
and stop when the next station with a strong signal is found.)
To program stations:
You can program 20 stations into your radio, then scroll through
them to select one for listening.
1.
From the standby mode, press
Menu
, scroll to
Radio
, and
press
Select
.
2.
Press
Options
, scroll to
Manual tuning
, and press
Select
.
3.
Press
or
to select the frequency of a radio station and
press
OK
.
4.
Press
Options
, scroll to
Save channel
, press
Select
, enter a name
for the channel, and press
OK
.
5.
Scroll to a channel position and press
Select
to assign the
channel to this location.
6.
To program more channels, repeat Steps 2–5 until finished
with your programming.
Note:
To use voice commands to operate the radio, the radio must be on and
the phone in the standby mode.
