Nokia NSW-6 Series, Technical Documentation Manual, Page: 50 / 68

NSW-6
System Module SE2
PAMS Technical Documentation
Page 50 Issue 1 12/99
Nokia Mobile Phones Ltd.
Unit Max Typ/
Nom
Min Parameter
Noise figure @ max gain 8 dB
Control voltage for min gain 0.5 V
Control voltage for max gain 1.4 1.45 V
AGC gain control slope TBD 90 TBD dB/V
Mixer output 1dB compr. point 0.8 V
pp
Gain of the last IF buffer 34 36 38 dB, single ended
Max IF2–buffer output level 1.4 V
pp
IF2–buffer output impedance 300 ohm, single ended
Transmitter
RF Characteristics of the transmitter:
Item DAMPS TDMA1900
TX frequency range 824.01...848.97 MHz 1850.01...1909.95 MHz
Type
Upconversion
Intermediate frequency 161.19 MHz 196.23 MHz
Nominal power on highest power level 480mW (
≈
26.8 dBm) / 400mW (
≈
26 dBm)
Power control range 65 dB
Maximum rms error vector 12.5 %
TX Power levels
Power level Analog
mode
Digital mode
800 MHz
Digital mode
1900 MHz
Design
target (**
Unit /
Notes
Class III Class IV Class IV Class IV dBm
0 28 +2 ,–4 28 +2 ,–4 28 +2 ,–4 dBm
1 28 +2 ,–4 28 +2 ,–4 28 +2 ,–4 dBm
2
Reduced 2 (*
28 +2 ,–4
26 +2 ,–2 28 +2 ,–4
26 +2 ,–2 28 +2 ,–4
26 +2 ,–2
28 +0.5 ,–1
26 +1 ,–1
dBm
Power level Analog
mode
Digital mode
800 MHz
Digital mode
1900 MHz
Design
target (**
Unit /
Notes
3 24 +2 ,–4 24 +2 ,–4 24 +2 ,–4 24 +2 ,–2 dBm
4 20 +2 ,–4 20 +2 ,–4 20 +2 ,–4 20 +2 ,–2 dBm
5 16 +2 ,–4 16 +2 ,–4 16 +2 ,–4 16 +2 ,–2 dBm
6 12 +2 ,–4 12 +2 ,–4 12 +2 ,–4 12 +2 ,–2 dBm
7 8 +2 ,–4 8 +2 ,–4 8 +2 ,–4 8 +2 ,–2 dBm
8 – 4 +2 ,–4 4 +2 ,–6 4 +2 ,–2 dBm
9 – 0 +2 ,–6 0 +2 ,–8 0 +2 ,–2 dBm
10 – –4 +2 ,–8 –4 +2 ,–10 –4 +2 ,–2 dBm