NSB-9
Company confidential
CCS Technical Documentation
Page 12
Copyright
Nokia. All rights reserved.
Issue 1 04/03
Update Installation of Phoenix
If you already have the Phoenix Service SW installed on your computer, sooner or later
there will be need to update it when new versions are released.
Please note that very often the Phoenix Service SW and the Phone Specific Data Package
for Phoenix come in pairs, meaning that certain version of Phoenix can only be used with
certain version of Data Package. Always use the latest available versions of both. Instruc-
tions can be found in phone model specific Technical Bulletins.
To update the Phoenix you need to take exactly the same steps as when installing it for
the first time.
•
Download the installation package to your computer hard disk
•
Close all other programs
•
Run the application file (e.g.
phoenix_service_sw_a3_03_83_005.exe
)
•
Dongle driver version will be checked and if need be, updated
•
After reboot installation starts automatically
•
Newer version of Phoenix will be installed
When you update the Phoenix from old to new version (e.g.
update from 3.83.005 to
3.83.005
5), the update will take place automatically without uninstallation
If you try update the Phoenix with the same version that you already have (e.g. 3.55 to
3.55) you are asked if you want to uninstall the version of Phoenix you have on your PC.
Answer “OK” to uninstall Phoenix, “Cancel” if you don’t want to uninstall.
If you try to install an older version (e.g. downgrade from
3.83.005 to 3.83.005
) instal-
lation will be interrupted.
Always follow the instructions on the screen
.
