manualshive.com logo in svg

Nokia NPD-1 Series, Troubleshooting - Rf

The Nokia NPD-1 Series Assembly Manual is a comprehensive guide that provides step-by-step instructions on how to assemble and set up your Nokia NPD-1 device. This manual is available for free download at manualshive.com, ensuring a hassle-free and user-friendly experience for our valued customers.

Share
Download
background image

CCS Technical Documentation

Troubleshooting — RF

NPD-1

Issue 1 11/2002

Nokia Corporation       Confidential

Page 3

Contents

Page No

RF Troubleshooting ....................................................................................................... 5
Tuning Descriptions ....................................................................................................... 8

ST Batman VHFPLL  ...................................................................................................8
ST TX Detector Cell ....................................................................................................9
ST Robin VHFPLL Cell  ............................................................................................10
ST TX Detector PCS  .................................................................................................10
ST Robin VHF PLL PCS ...........................................................................................11
SN Cell PA Temp  ......................................................................................................11
SN Cell RX BB Filter  ................................................................................................12
SN Cell RX DC Offset I (or Q)  .................................................................................12
SN AMPS RX BB Filter ............................................................................................12
SN AMPS RX DC Offset I (or Q)  .............................................................................13
Test TX Start up Current  ...........................................................................................13
Test TX Start up Amplitude  ......................................................................................13
 TN VCTCXO Frequency ..........................................................................................13
TN TX DC Offset Reference Power ..........................................................................15
TN TX DC Offset Carrier Suppression  .....................................................................16
TN TX IF AGC Cell Po (0)    [or (1), (2), (3), or (4)]  ...............................................17
TN PA Gain Cal Cell Po (0)    [or, (1), (2), (3), (4), or (5)]  ......................................18
TX TX IF 11 dBm Set CELL Po  ...............................................................................19
TN TX RF AGC Cell Po (0)    [or (1), or (2)]  ...........................................................19
TN TX Gain Comp Cell (or PCS) Po MD (or LO, LM, ML, MH, HM, or HI) ........20
TN G_Offset Cell MD  ...............................................................................................21
TN AMPS PL2 Po Mid (or Low, LowMid, MidLow, MidHigh, HighMid, or High) 21
TN AMPS PL3 (or 4, 5, 6, or 7) Po ...........................................................................22
TN PA Gain Cal PCS Po (0)    [or (1), (2), (3), (4), or (5)] .......................................22
TN TX IF 11 dBm Set PCS Po  ..................................................................................22
TN TX RF AGC PCS Po (0)    [or (1), or (2)] ...........................................................22
TN TX Limiting Po Cell (or PCS) IS95, Low channel (or LowMid, MidLow, Mid, 

         MidHigh, HighMid, or High channel)  .....................................................................23

TN TX Limiting Cell (or PCS) CDMA2000: Po  ......................................................23
TS ACPR PCS- Low (High) ......................................................................................24
TN PA Detector PCS Po (0)     [or (1), (2), (3), (4), (5), (6), or (7)]  .........................25
TS ACPR Cell - Low .................................................................................................26
TN RX IF AGC RXdBCtr (0)    [or (1) or (2)] ..........................................................26
TN LNA AMPS (or Cell or PCS) LowGain (or HighGain) LO (or LM, ML, MD, 

         MH, HM, HI)  ...........................................................................................................27

Final UI test: Rho .......................................................................................................27
Final UI test: Frame Error Rate (FER)  ......................................................................28
Final UI test: SINAD  .................................................................................................28

Probing/Troubleshooting Tables and Diagrams .......................................................... 28

Transmitter Probing................................................................................................. 29
Receiver Probing ..................................................................................................... 34
RF Power Supplies .................................................................................................. 40
Probing Diagrams ................................................................................................... 41

APPENDIX A: Phoenix Instructions ........................................................................... 45

To turn on the PCS or Cell CDMA transmitter....................................................... 45

Summary of Contents for NPD-1 Series































































Reviews:

No comments

Related manuals for NPD-1 Series

i-mate SP2 Quick Start Manual preview
SP2
Brand: i-mate Pages: 29
Samsung TracFone SGH-T155G Series Manual Del Usuario preview
TracFone SGH-T155G Series
Brand: Samsung Pages: 56
Samsung TracFone SGH-T245G Manual Del Usuario preview
TracFone SGH-T245G
Brand: Samsung Pages: 88
Samsung Trender SPH-M380 Manual Del Usuario preview
Trender SPH-M380
Brand: Samsung Pages: 192
SoftBank 007SH User Manual preview
007SH
Brand: SoftBank Pages: 124
Alcatel T-Mobile 4044W Manual preview
T-Mobile 4044W
Brand: Alcatel Pages: 24
Groov-e GV-WM4 Fitting Instructions preview
GV-WM4
Brand: Groov-e Pages: 2
Netway 4.5 qHD User Manual preview
4.5 qHD
Brand: Netway Pages: 68
FLIR FlirOne User Manual preview
FlirOne
Brand: FLIR Pages: 2
Blaupunkt FM 02 User Manual preview
FM 02
Brand: Blaupunkt Pages: 38
Pantech C630 User Manual preview
C630
Brand: Pantech Pages: 61
iDROID IKON Z5 User Manual preview
IKON Z5
Brand: iDROID Pages: 21
SoftBank X02HT Usage Notice preview
X02HT
Brand: SoftBank Pages: 2
Viking K-1900-8-IP Product Manual preview
K-1900-8-IP
Brand: Viking Pages: 25
Sony Ericsson XPERIA mini Extended User Manual preview
XPERIA mini
Brand: Sony Ericsson Pages: 114
Verykool s5016 User Manual preview
s5016
Brand: Verykool Pages: 58
Avaya 1120E IP User Manual preview
1120E IP
Brand: Avaya Pages: 242
Nortel M3905 Call Center Quick Reference Card preview
M3905 Call Center
Brand: Nortel Pages: 2

Brands by name

Popular brands

Load more brands