WW Competence Transfer
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
29.Mrz.2007
4
Service Manual N80 RM-9/RM-92
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
Page
(27)
17. Unscrew the Torx Plus® size 6 SCREWS.
For assembly: tighten
the screws with a torque setting of 14Ncm.
18. Remove the UI SUPPORT.
NOTE! When assembling the UI
SUPPORT it is important to place it under the marked edge.
19. Push out the EARPIECE.
20. Unlock and remove the VGA CAMERA with the SS-51. Note the
guide pin when re-assembling the CAMERA.
21. Lift up the 1MJ UI PWB ASSY with the SRT-6 carefully. Do not
damage the two snaps on both sides of the FLEX I/CONN MODULE.
22. Gently, lift a bit the UI PWB.
23. Take special care when opening the FLEX I connector.
24. Place the SRT-6 exactly as shown and slide it gently along the
edge of the connector.
