WW Competence Transfer
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
29.Mrz.2007
6
Service Manual N80 RM-9/RM-92
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
Page
(27)
33. Open snap 5.
34. Remove the KEYMAT BEZEL.
35. Remove the ITU KEYMAT.
36. Unscrew the Torx Plus® size 6 SCREWS in the order shown. For
assembly use the reverse order with a torque setting of 23Ncm.
Always use new SCREWS when re-assembling the unit.
37. Close the SLIDE ASSY.
38. Remove the UI FRAME SPARE include the ENGINE SHIELD ASSY.
39.
Do not pull the
SLIDE ASSY
apart, unless replacement is
necessary.
40.
Mind the correct assembling when connecting the FLEX I/CONN
MODULE to the ENGINE MODULE.
For assembly only!
