manualshive.com logo in svg

Nokia MEDIAMASTER 9902 S, Owner'S Manual, Page: 33 / 62

Share
Download
Nokia MEDIAMASTER 9902 S Owner'S Manual Download Page 33

GB 33

HARD DISK RECORDING

To start playback of a recording

You find a finished recording in the 

List of recordings

 which you

reach by

• Pick up the recording menu to the screen by pressing 

• Select 

 from the menu to pick up the 

List of recordings

to the screen

• Step to one of the recordings with     and press 

OK

The pause function

It is possible to make a pause during a playback of any recording.
A pause causes the picture on the screen to “freeze”.

Pause during playback of a normal recording

• First call up the recording menu by pressing 

• Start the playback of a programme from the List of recordings.

• Alternate between playback and pause mode by pressing 

OK

.

Pause during playback of a pause recording in progress

The pause function is possible to use also while a pause record-
ing is still in progress. Note, that the right counter will be active
all the time due to the fact that the recording is still in progress.

• First call up the recording menu by pressing 

• Start the playback of the pause recording by pressing 

OK

, and

also the left counter starts.

• Alternate between playback and pause mode by pressing 

OK

.

• The 

Handle Recording

 menu appears

• Select 

Play 

and the playback starts

• The left counter starts to show elapsed time

• The right one shows the total length of the recording and the

elapsed time in %

Summary of Contents for MEDIAMASTER 9902 S































































Reviews:

No comments