Navi Bars
GB 26
Picture format
If you have a TV set with a 4:3 picture format and the transmission
is 16:9, you can select "Fullscreen" or "Letterbox".
Fullscreen will fill the screen but some information on the left and
right sides will be cut off.
Letterbox will give a complete picture, but black areas will be visi-
ble at the top and bottom of the screen.
TV standard
When the Mediamaster is connected to the TV by an RF cable, you
may need to select the correct TV standard system.
Select
PAL G
when the box is used outside the UK and France.
Select
PAL I
when the box is used inside the UK.
Select
SECAM
when the box is used in France.
RF modulator output channel
Select this alternative if you have to change the RF channel. (Chan-
nel 43 is preset from factory.) Select another RF output channel
number from the right part of the RF modulator output channel
line. Channels found during the first time installation will not be
able to select.
When you change the RF channel number, you must also change to
the same value on the TV. If you do not, there will be no picture and
sound.
Settings folder
—
Access
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory
.
The following settings can be altered from this menu.
Access Control
Select "Yes" or "No" to turn the access control for all menus on or
off.
NOTE:
even when "No" has been selected, the access code must
still be entered before you can watch locked channels.
Receiver lock
If you select "Yes", you will have to enter the access code every time
you activate the Mediamaster from standby mode.
Age rating control
If you want everybody to have access to all available types of pro-
grammes, select "No".
If you select "Yes", you may block programmes that are unsuitable
for children.
'fullscreen' 'letterbox'
