Navi Bars
GB 24
Control folder
—
System info
If you need to contact your Service Provider or a Service Centre, they
may ask for information available from this menu.
This gives general information about the hardware and software
version on which your Mediamaster is running.
Control folder
—
CA Menu
This menu might appear when you use a CA module.
From the menu, you will get information related to your Service
Provider.
Settings folder
—
Channel
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory
.
A channel search procedure can be performed in different ways:
Automatic, Manual or Advanced manual search.
Automatic search
• Highlight the line and press
ok
to start searching for channels.
Manual search
When you perform a Manual search you first need to enter some pa-
rameters for the channel search to work.
The information you need to enter in this menu should be supplied
by your Service provider.
•
Channel
: Select the channel you want to search for.
•
Network search
: Select “Yes” if you want to search on all trans-
mitters connected to a specific network.
• Press
ok
to start searching for channels
