Nokia IPSO 4.0, Reference Manual

Page: 466 / 510

10
466 Nokia Network Voyager for IPSO 4.0 Reference Guide
5.
Click Apply.
6.
Click Save to make your changes permanent.
Example: Expedited Forwarding
This example illustrates the combined use of the Access Control List, Traffic Conditioning, and
Queuing features.
This example demonstrates how to improve the response time to Telnet sessions between client
and server systems over a private WAN connection within a corporate intranet as shown in the
diagram below. The WAN interfaces for Network Application Platform (Nokia Platform) A and
for Network Application Platform (Nokia Platform) B are ser-s3p1. The following configuration
is done both on Nokia Platform A and Nokia Platform B.
1.
Save the current configuration on each Nokia Platform before you set up QoS. Doing so
allows you to compare the relative performance of the QoS and non-QoS configurations.
a. Click Configuration Sets under Configuration > System Management in the tree view.
b. Enter
pre-QoS
in the Save Current State to New Configuration Database edit box.
c. Click Apply, and then click Save to make your change permanent.
2. Create an Aggregation Class
a. Click Aggregation Class under Configuration > Traffic Management in the tree view.
b. Enter
wan_1_ef
in the Name edit box in the Create a New Aggregation Class section.
c. Enter
100
in the Mean Rate (Kbps) edit box.
d. Enter 5000 in the Burstsize (bytes) edit box.
e. Click Apply, and then click Save to make your Changes permanent.
3. Create a Queue Class
a. Click Queue Class link under Configuration > Traffic Management in the tree view.
b. Enter
wan_1_ef
in the Create a New Queue Class edit box.
c. Click on the link to wan_1_ef in the Existing Queue Classes section to view existing
queue class values.
00045
Client
Server
LAN LAN WAN Link
Nokia
Platform A
Nokia
Platform B