manualshive.com logo in svg

Nokia IPSO 4.0, Reference Manual

Share
Download
Nokia IPSO 4.0 Reference Manual Download Page 326

8

 

326

Nokia Network Voyager for IPSO 4.0 Reference Guide

„

Select a different item in the Type list that matches the new requirements of the service. 

For a description of the authentication algorithms that the list items represent, see 
Authentication Profile Types.

„

Select a different item in the Control list that matches the new requirements of the service. 

Values other than required are effective only when the service requires more than one Auth. 
Profile. For a description of the effect on result disposition and subsequent algorithm 
invocation that the list items represent, see Profile Controls.

Note

The Server/File field is unused.

Changing an Accounting Profile Configuration

In the Acct. Profile table, make one or more of the following changes to the row where the 
service Acct. Profile name is in the Name column:

„

Select a different item in the Type list that matches the new service requirements. 

For a description of the accounting algorithms that the list items represent, see Accounting 
Profile Types.

„

Select a different item in the Control list that matches the new service requirements.

Values other than required are effective only when the service requires more than one Acct. 
Profile. For a description of the effect on result disposition and subsequent algorithm 
invocation that the list items represent, see Profile Controls.

Note

The Server/File field is unused.

Changing a Session Profile Configuration

In the Session Profile table, make one or more of the following changes to the row where the 
service session profile name is in the Name column:

„

Select a different item in the Type list that matches the new service requirements. 

For a description of the session algorithms that the list items represent, see Session Profile 
Types.

„

Select a different item in the Control list that matches the new service requirements. 

Values other than required are effective only when the service requires more than one 
Session Profile. For a description of the effect on result disposition and subsequent 
algorithm invocation that the list items represent, see Profile Controls.

Summary of Contents for IPSO 4.0































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands