press the power key in the standby mode. Scroll to
the profile you want to activate, and select
OK
.
Tip:
To switch between the general and silent
profiles in the standby mode, press and hold
#
.
To modify a profile, scroll to the profile, and select
Options
>
Personalise
. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored in the mass memory of your
device are indicated with .
In the tones list, select
Download sounds
(network
service) to open a list of bookmarks. You can select
a bookmark and start connection to a web page to
download more tones.
If you want the caller’s name to be spoken when
your device rings, select
Options
>
Personalise
,
and set
Say caller's name
to
On
. The caller’s name
must be saved in Contacts.
To create a new profile, select
Options
>
Create
new
.
3-D tones
Press , select
Tools
>
Utilities
>
3-D tones
.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
3-D ringing tone
effects
>
On
. To change the ringing tone, select
Ringing tone
and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select
Sound trajectory
and the
desired effect.
To modify the effect, select from the following
settings:
●
Trajectory speed
— Scroll left or right to adjust
the speed at which sound moves from one
direction to another. This setting is not available
for all ringing tones.
●
Reverberation
— Select the type of echo.
●
Doppler effect
— Select
On
to have the ringing
tone sound louder when you are closer to your
device, and softer when you are farther away.
When you get closer to the device, the ringing
tone appears to become louder, and softer when
you move away from it. This setting is not
available for all ringing tones.
To listen to the ringing tone with the 3-D effect,
select
Options
>
Play tone
. If you enable the 3-D
102
Persona
lise
your de
vice
