Install a Gateway 3 (G-240W-E)
50
Nokia WiFi Gateway 3 Product Guide
3FE-47464-AAAA-TCZZA
Issue: 01
i
Remove the fiber optic connection cover (white cylinder), as shown in Figure
Figure 9
Gateway 3 (G-240W-E) cylinder removal
ii
Detach the bottom cover.
iii
Plug the fiber optic cable with the SC/APC adapter into the fiber optic connector, as
shown in Figure
.
iv
Wind the fiber optic cable through the fiber track at the base of the cylinder until the
desired length of the cable is reached.
v
Press the fiber optic cable into the slot.
vi
Replace the bottom cover.
vii
Replace the fiber optic connection cover (white cylinder).
3
Review the connection locations, as shown in Figure
Note —
Fiber cable preparation varies depending on the type and size
of the inside or outside plant fiber cable being spliced to the SC/APC fiber
optic pigtail cable.
Fiber raceway
Cylinder
Bottom cover
Fiber optic cable
and connector
2
8
292