Some or all access points may be preset for your device by
your service provider, and you may not be able to create, edit,
or remove them.
Set up an internet access point
for packet data (GPRS)
1. Select
Menu
>
Tools
>
Settings
>
Connection
>
Access points
.
2. Select
Options
>
New access point
to create a new
access point, or select an existing access point from the
list and then
Options
>
Duplicate access point
to use
the access point as a basis for the new one.
3. Define the following settings.
•
Connection name
— Enter a descriptive name for the
connection.
•
Data bearer
— Select
Packet data
.
•
Access point name
— Enter the name for the access
point. The name is usually provided by your service
provider.
•
User name
— Enter your user name if required by the
service provider. User names are often case-sensitive
and provided by your service provider.
•
Prompt password
— Select
Yes
to enter your
password each time you log into a server or
No
to save
the password in your device memory and automate
the login.
•
Password
— Enter your password if required by the
service provider. The password is often case-sensitive
and provided by the service provider.
•
Authentication
— Select
Secure
to send your
password always encrypted, or
Normal
to send your
password encrypted when possible.
•
Homepage
— Enter the web address of the page you
want to display as the home page when you use this
access point.
4. After defining the settings, select
Options
>
Advanced
settings
to define the advanced settings or
Back
to save
the settings and exit.
Advanced internet access point
settings for packet data (GPRS)
Select
Menu
>
Tools
>
Settings
>
Connection
>
Access
points
.
After setting up a basic internet access point for packet data
(GPRS), select
Options
>
Advanced settings
, and define the
following advanced settings:
•
Network type
— Select
IPv4
or
IPv6
as the internet
protocol type. The internet protocol defines how data is
transferred to and from your device.
•
Phone IP address
— Enter the IP address of your device.
Select
Automatic
to have the network provide the device
IP address. This setting is shown only if you select
Network type
>
IPv4
.
Connectivity
© 2007 Nokia. All rights reserved.
102
Summary of Contents for E51 - Smartphone 130 MB
Page 1: ...E51 User Guide ...
Page 2: ...Issue 3 ...
Page 155: ...Manual del Usuario para E51 ...
Page 156: ...Edición 3 ...
