60/113
0
voice (default) – Dummy code included for compatibility reasons
1
alternating voice/fax, voice first (teleservice 61) – Dummy code included for
compatibility reasons
2
fax (teleservice 62)
4 data
5
alternating voice/fax, fax first (teleservice 61) – Dummy code included for
compatibility reasons
8.3.10 +CHSR HSCSD parameters report
Command Response
Default
set
+CHSR=<mode>
0
read
+CHSR?
+CHSR: <mode>
test
+CHSR=?
+CHSR: (0-1)
Mandatory when HSCSD is implemented. 07.07 section 6.16.
8.3.11 +CHSD HSCSD device parameters
Command
Response
+cme
error
execute
+CHSD
+CHSD: <mclass>,<maxRx>,<maxTx>,<sum>,<codings>
x
test
+CHSD=?
6,3,2,4,12
Mandatory when HSCSD operation is implemented. 07.07 section 6.12.
Parameters:
<mclass>: integer type; multislot class
<maxRx>: integer type; maximum number of receive timeslots that ME can use
<maxTx>: integer type; maximum number of transmit timeslots that ME can use
<sum>:
integer type; total number of receive and transmit timeslots that ME can use at
the same time (per TDMA frame). The following applies in a HSCSD call: 1 <=
(receive slots) + (transmit slots) <= <sum>
<codings> is a sum of integers, each representing a supported channel coding (e.g. value
12 indicates that 9.6k and 14.4k channel codings are supported):
1
4.8k full rate data traffic channel
4
9.6k full rate data traffic channel
8
14.4k full rate data traffic channel
8.3.12 +CHSN HSCSD non-transparent call configuration
Command
Response
Default
set
+CHSN=<wAiur>,<wRx>,
<topRx>,<codings>
0,0,0,0
read
+CHSN?
+CHSN: <wAiur>,<wRx>,<topRx>,<codings>
test
+CHSN=?
+CHSN:
(list of supported
<wAiur>
s), (list of
supported
<wRx>
s)
,(
list of supported
<topRx>
s,
(list of supported
<codings>
s)
(0-4,6), (0-3), (0-3), (0,4,8,12)
Mandatory when non-transparent HSCSD calls are implemented.
Parameters
