47/113
7.1.7 +GSN Request TA serial number identification
Command
Response
execute
+GSN
xxxxxxxxxx…
Optional. V.25ter section 6.1.7. Note that because TA and ME are in a single physical entity,
response of
+CGSN
is identical (i.e. IMEI).
7.1.8 +GCAP Request complete capabilities list
Command
Response
execute
+GCAP
+GCAP: +CGSM,+DS,+W
Mandatory. V.25ter section 6.1.9. Above mentioned response returned when GSM 07.07
commands, some fax classes, and V.42bis compression supported.
7.2 DE
FACTO
7.2.1 &V
View
configuration
Command
Description
execute
&V[0]
show current settings (all command parameter values defined under
&F
plus
&Y
setting)
&V1
show settings in stored profile 0 (all command parameter values defined under
&W
)
&V2
show settings in stored profile 1 (all command parameter values defined under
&W
)
Mandatory (values 1 and 2 shall be present only when stored profiles are supported).
Response format must fit in one 80 times 24 character display and all command parameters
stored in a profile (or current settings) must be shown as ‘command name’-‘values of
parameters’ pairs (e.g.
+CSSN=0,1
or
E0
or
S7=80
or
+COPS=,2
or
+CSCS="HEX"
).
7.2.2 &W
Store
configuration
Command
Description
execute
&W[0]
store to profile 0
&W1
store to profile 1
Mandatory when stored profiles are supported. Command parameters that are stored to a
profile are the same as listed under
&F
command except to the parameters of the following
commands which are not stored:
+CMOD
,
+CSCA
,
+CSMP
.