manualshive.com logo in svg

Nokia Communicator 9290, User Manual

Share
Download
Nokia Communicator 9290 User Manual Download Page 92

74

General information

Call status

- A voice call with the handsfree off. The loudspeaker and 

microphone are muted.

- An open data connection, see the Internet chapter on page 149. 

- The communicator is receiving or sending a fax.

- The communicator is trying to establish an infrared connection.

- An infrared connection has been established.

- The infrared connection is obstructed.

- The communicator is connected to a PC.

- The communicator is connected to a PC via cable.

- The communicator is being used as a fax modem.

- The communicator is in a profile, in this case in the ‘Meeting’ 

profile. See ‘Telephone Settings’ on page 100.

- Time. You can adjust time in the Clock application. See page 227.

Application icon

Application name

Inbox/Outbox

Signal strength and battery level

Time

Summary of Contents for Communicator 9290

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands