49
In Windows 95/98/Me, Network Neighborhood does not show my computer name at all.
Other computers cannot see my computer name in Network Neighborhood either.
Open the Network dialog box (click
Start
,
Settings
,
Control Panel
,
Network
) and
click the
File and Print Sharing
button. Make sure that the
I want to be able to give
others access to my files
check box is selected. Other users should now be able to
see your computer in Network Neighborhood. If you share folders on your
computer, other users can see them too.
In Windows 95/NT 4.0, I cannot browse Network Neighborhood in the ad hoc operating
mode.
Open the
Network
dialog box (click Start, Settings, Control Panel, Network) and
double-click
File and printer sharing for Microsoft Networks
in the list of network
components. Check that the Browse Master has value Enabled or Automatic, not
Disabled. Updating Network Neighborhood may take a while.
In Windows NT 4.0, I cannot join the domain.
If you allow the domain settings to be managed by the Nokia C110/C111, you
might lose your domain settings if you use a profile without a domain. To avoid
being mistakenly locked out, go to the General settings page, select the
Advanced
tab and clear the
Manage domain settings together with profiles
check box.
I cannot access the Internet.
Check that you use a routing protocol such as TCP/IP.
Make sure that the proxy settings in the Web browser are correct.
Also make sure that there is a connection from your network to the Internet.
In Windows 95, when roaming between networks, the system crashes and the computer
displays a blue screen.
You should update Microsoft Winsock 2.0. Download it from the Microsoft Web
site at www.microsoft.com, and run the installation program. Note that you
should always re-install the Winsock 2.0 update after adding or removing new
protocols.
Changes made to general settings do not become effective immediately.
General settings are enabled only after the network connection is ended. A
changed country setting, however, becomes effective immediately after clicking
the
Apply
button on the General settings page.
