Nokia 95, Owner'S Manual

Page: 78 / 140

Personalize your device
78
If you want the caller’s name to be spoken when your
device rings, select
Options > Personalise , and set Say
caller's name to On . The caller’s name must be saved in
Contacts .
To create a new profile, select Options > Create new .
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the
Offline profile, the connection to the wireless
network is turned off, as indicated by in the signal
strength indicator area. All wireless RF signals to and from
the device are prevented. If you try to send messages, they
are placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
When you have activated the Offline profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See ‘Wireless LAN’, p. 25.
You can also use Bluetooth connectivity while in the
Offline profile. See ‘Bluetooth connectivity’, p. 28.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
3-D tones
Press , and select Tools > 3-D tones . With 3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On . To change the ringing tone, select Ringing
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select
Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed —Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation —Select the type of echo.