manualshive.com logo in svg

Nokia 9357715, User Manual

Share
Download
Nokia 9357715 User Manual Download Page 59

47

Phone

When the keypad is locked, you can answer calls normally by pressing 

. During 

a voice call, the keypad is unlocked and the communicator can be operated in the 
usual way. After the call, the keypad is automatically locked again.

The keypad will be unlocked automatically when the communicator is connected 
to a car kit. When the communicator is removed from the car kit, without being 
switched off, the keypad will be locked automatically again.

To lock the keypad

Press 

Menu

 and then the 

 key within 3 seconds.

Note:

 While the keypad is locked, the 

 icon and the 

Unlock

 command are 

displayed.

To unlock

Press 

Unlock

 and then the 

 key within 3 seconds.

Note:

 When the phone is locked, calls may be possible to the emergency 

number programmed into your phone (e.g. 112 or other official 
emergency number).

To change profiles

Example:

 If you use the 

Meeting profile in a meeting 
the phone rings only once so 
as not to disturb others.

You can use the Profiles key 

 to adjust phone tones for the various operating 

environments of the communicator. One profile is always in use.

For more detailed information on the various profiles, how to adjust the settings 
and so on, see ‘Profile settings’ on page 78.

Linda1.book  Page 47  Friday, April 12, 2002  8:31 PM

Summary of Contents for 9357715































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands