manualshive.com logo in svg

Nokia 9357715, User Manual

Share
Download
Nokia 9357715 User Manual Download Page 182

170

Messa

gi

ng

ECM

: 

Defines whether or not the Error Correction Mode is used when faxes are 
sent. If set to On, any pages containing errors are automatically returned 
to sender, until the defects are corrected. The options are On/Off.

Resend

: 

Defines which pages will be sent again if the fax sending has failed. The 
options are All pages/Missed pages.

Mail

The Nokia 9210i Communicator mail system is compliant with Internet standards 
SMTP, IMAP4 (rev 1) and POP3.

To be able to receive and send mail, you need to have set up a remote mailbox 
service. This service may be offered by an Internet service provider, a network 
service provider, or your company.

Tip:

 If you press 

Write 

mail

 in the main view of 

Messaging and you have not 
set up your mail account, 
you will be prompted to do 
so.

Before you can send, receive, retrieve, reply to, and forward mail on your 
communicator, you must do the following:

• You must configure an Internet access point (IAP) correctly. See ‘To set up your 

Internet access point’ on page 132

• You must define your Mail settings correctly. See ‘Mail settings’ on page 170.

Note:

 Follow the instructions given by your remote mailbox and Internet service 

providers.

Mail settings

Any changes you make to mail settings affect the way your mail is sent and 
received. 

Linda1.book  Page 170  Friday, April 12, 2002  8:31 PM

Summary of Contents for 9357715































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands