background image

Copyright

©

2003 Nokia. All rights reserved.

Important safety information

36

regarding your vehicle. You should also consult the manufacturer of any equipment that has been 
added to your vehicle.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be maintained 
between a camera and a pacemaker to avoid potential interference with the pacemaker. These 
recommendations are consistent with the independent research by and recommendations of Wireless 
Technology Research. Persons with pacemakers:

• Should always keep the camera more than 20 cm (6 inches) from their pacemaker when the camera 

is switched on;

• If you have any reason to suspect that interference is taking place, switch off your camera imme-

diately.

Hearing aids

Some observation cameras may interfere with some hearing aids. In the event of such interference, 
you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cameras, may interfere with the 
functionality of inadequately protected medical devices. Consult a physician or the manufacturer of 
the medical device to determine if they are adequately shielded from external RF energy or if you have 
any questions. Switch off your camera in health care facilities when any regulations posted in these 
areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be 
sensitive to external RF energy.

Summary of Contents for 9356130














































Reviews: