Nokia 8250 User Manual Download Page 15 | Manualshive

Page: 15 / 64

Nokia 8250 User Manual Download Page 15

G e t t i n g s t a r t e d

4

5. Slide the back cover into its place.

■

Charging the battery

1. Attach the

lead from
the charger
carefully to
the socket
(1.) on the bottom of your phone.

NOTE: Connector (2.) is the
headset connector. Do not plug
your headset in the charger
connector. It may damage the
charger connector.

2. Connect the charger to an

AC wall outlet. The battery
indicator bar starts to scroll.

The text

Charging

is briefly

displayed if the phone is
switched on. You can use the
phone while charging.

NOTE: If the battery is totally
flat, it may take a few minutes
before the charging indication
appears on the display or any
calls can be made. The charging
time depends on the charger and
battery used. For example,
charging a BLB-2 battery with
the ACP-8 charger takes about 1
hour and 40 minutes.

3. The battery is fully charged when

the battery indicator bar stops
scrolling. If the phone is on, the
text

Battery full

is also briefly

displayed.

4. Disconnect the charger from the

AC outlet and the phone.

If

Not charging

is displayed,

charging has been suspended. Wait
for a while, disconnect the charger
and plug it in again. If charging still
fails, contact your dealer.

For more information, see chapter
‘Reference Information’ - ‘Battery
Information’.

■

Switching the phone on
and off

Press and hold the power key.

If the phone requests a PIN code

• Key in the PIN code, which is

displayed as asterisks Q, and
press

OK

.

See also ‘Reference Information’
- ‘Access Codes’.

1 2

NOK

IA

«
...
13
14
15
16
17
...
»

Summary of Contents for 8250

































































Reviews:

No comments