Taking care of your device
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
•
Do not store the device in high or cold temperature.
High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics. When the device warms to its normal
temperature from a cold temperature, moisture can
form inside the device and damage electronic circuit
boards.
•
Do not attempt to open the device other than as
instructed in this guide.
•
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
•
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device. Only use a soft, clean,
dry cloth to clean the surface of the device.
•
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
•
Use chargers indoors.
•
Backup all data you want to keep, such as contacts and
calendar notes.
•
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device, battery,
charger, or any accessory.
Recycle
Always return your used electronic products, batteries, and
packaging materials to dedicated collection points. This way
you help prevent uncontrolled waste disposal and promote
the recycling of materials. Check product environmental
information and how to recycle your Nokia products at
www.nokia.com/werecycle, or nokia.mobi/werecycle.
China ROHS Table
Toxic or hazardous
Substances and Elements
Part name
Phone Battery Accessories
Lead (Pb)
X
X
X
Mercury (Hg)
O
O
O
Cadmium (Cd)
O
O
O
Hexavalent Chromium
(Cr6+)
O
O
O
Polybrominated
biphenys(PBB)
O
O
O
Polybrominated diphenyl
ethers (PBDE)
O
O
O
O: Indicates that this toxic or hazardous substance contained
in all of the homogeneous materials for this part is below the
limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained
in at least one of the homogeneous materials used for this
part is above the limit requirement in SJ/T 11363-2006.
Notes: The reason for marking "X" is: there is currently no
alternative technologies available.
Additional safety information
Small children
Your device and its accessories are not toys. They may contain
small parts. Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines in the normal use
position at the ear or at least 1.5 centimetres (5/8 inch)away
from the body. Any carry case, belt clip, or holder for body-
worn operation should not contain metal and should position
the device the above-stated distance from your body.
To send data files or messages requires a quality connection
to the network. Data files or messages may be delayed until
such a connection is available. Follow the separation distance
instructions until the transmission is completed.
Product and safety information 57
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
