Nokia 6305i - Cell Phone 128 MB, User Manual

Page: 50 / 137

S e t t i n g s a n d t o o l s
49
• Digit Dialing —Adapt digit dialing to your voice. Select Adapt Digits to improve
voice recognition of phone numbers. Adaptation takes about 60 seconds.
Select
Reset Digits to erase any digit adaptation you have done and reset digit
dialing to the factory default. If you have not adapted digits, this option is
grayed out.
• Sound —Customize the settings for playback of names, name settings, and
numbers. Select Prompts , Digits , or Names to turn their associated playback
on or off. Select Name Settings > Speed > Faster or Slower to change the
speed of name playback. Select Name Settings > Volume > Louder or Softer to
change the volume of name playback.
• About —View information about the voice services software. Go to
www.voicesignal.com for more information.
Adapt Digits —Use your voice to enable voice services to recognize how you
pronounce numbers. At the prompt, repeat the series of numbers displayed. This
process takes approximately 60 seconds. You should be in a quiet room when you
set this option. See "Speaker phone," p. 14.
This option is also available in Voice Services through the Voice Services > Digit
Dialing > Adapt Digits menu.
Voice Memo —Create a recorded memo. The recorded memo can be inserted as
sound in a message, or used as a ringtone or alert. See "Sounds," p. 43.
Touch tones
Touch tones, or DTMF tones, are the tones that sound when you press the keys on your
device keypad. You can use touch tones for many automated dial-up services such as
banking and airlines, or for entering your voice mailbox number and password.
To set the key tone length and touch tone playback speed, select Menu > Settings
& Tools > Call Settings > DTMF Tones . Select Normal to send out a tone for a fixed
period of time no matter how long you press the key or Long to send out a
continuous tone for as long as you keep the key pressed.
■
Clock format
To choose the type of clock to display on the standby screen, select Menu >
Settings & Tools > Clock Format > Digital or Analog . Select Off if you want the
clock display feature turned off.