●
WEP key in use
— Select the wired equivalent privacy (WEP) key number. You
can create up to four WEP keys. The same settings must be entered on the WLAN
access point device.
●
Authentication type
— Select
Open
or
Shared
for the authentication type
between your device and the WLAN access point device.
●
WEP key settings
— Enter
WEP encryption
(length of the key),
WEP key
format
(
ASCII
or
Hexadecimal
), and
WEP key
(the WEP key data in the selected
format).
Security settings for 802.1x and WPA/WPA2
●
WPA/WPA2
— Select the means of authentication:
EAP
to use an extensible
authentication protocol (EAP) plug-in, or
Pre-shared key
to use a password.
Complete the appropriate settings:
●
EAP plug-in settings
— Enter the settings according to the instructions from
your service provider.
●
Pre-shared key
— Enter a password. The same password must be entered
on the WLAN access point device.
●
WPA2 only mode
— Only WPA2 enabled devices are allowed to establish a
connection in this mode.
Advanced WLAN settings
Select
Options
>
Advanced settings
and from the following:
●
IPv4 settings
— Enter the IP address of your device, the subnet IP address, the
default gateway, and the IP addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
●
IPv6 settings
— Define the type of DNS address.
●
Ad-hoc channel
(only for
Ad-hoc
) — To enter a channel number (1-11)
manually, select
User defined
.
●
Proxy server address
— Enter the address for the proxy server.
●
Proxy port number
— Enter the proxy port number.
Active data connections
Select
Menu
>
Settings
and
Connectivity
>
Connection mgr.
.
In the active data connections view, you can see the open data connections:
© 2009 Nokia. All rights reserved.
99
