• Dust (black spots)
• Lack of sharpness
• Bit errors
Taking and evaluating test pictures with main camera
When
taking
a test picture, remember the following:
• Avoid bright fluorescent light, 50/60Hz electrical network or high artificial illumination levels
• If the phone is hot, let it rest for a while before taking the picture
• Make sure the optical system is clean
• Use highest possible resolution
• Make sure the light is sufficient (bright office lightning)
• Do not take the picture towards light source
• Hold the phone as still as possible when taking the picture
• Pictures should be taken both at infinity ~>2m and at macro distance ~10-15 cm in order to verify auto
focus functionality
When
evaluating
a test picture, remember the following:
• The center of the picture is sharper than the edges
• If phone has auto focus: Remember that the white focussing frame which appears when the camera button
is pressed halfway down, must turn green for auto focus lock. If the frame turns red, the camera is not
focussed!
• The image may be blurred, though it does not show in the viewfinder
• Analyse the picture from your PC monitor, full colour setting is recommended
• If possible, compare with a picture of the same motive taken with a similar Nokia device
RM-257; RM-270; RM-277
BB Troubleshooting and Manual Tuning Guide
Page 3 –34
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2007 Nokia. All rights reserved.
