manualshive.com logo in svg

Nokia 3555, Service Manual

Share
Download
Nokia 3555 Service Manual Download Page 36

SS-46

Interface adapter

SS-46 acts as an interface adapter between the flash adapter and

FPS-10.

SS-62

Generic flash adapter

base for BB5

• generic base for flash adapters and couplers
• SS-62 equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection using galvanic connector or coupler
• multiplexing between USB and FBUS media, controlled by VUSB

SS-88

Camera removal tool

The camera removal tool SS-88 is used to remove/attach the front

camera module from/to the socket.

SS-93

Opening tool

SS-93 is used for opening JAE connectors.

ST-40

Rework stencil

ST-40 is a rework stencil and used with RJ-93.

RM-257; RM-270; RM-277

Service Tools and Service Concepts

Page 2 –12

COMPANY CONFIDENTIAL

Issue 1

Copyright © 2007 Nokia. All rights reserved.

Summary of Contents for 3555































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands