13
Module list button
Stop button
Module usage
Nokeval Radio Data Receiver module doesn’t
need any other than serial settings, which were
just made.
Nokeval Data Receiver module is split in two
sections. Upper section consists of status in-
formation of serial interface and receiver unit.
Lower section shows most recently received
data packets.
PromoLog gets new information from device only
when application is in running state.
Explanations for lower section columns:
Column
Description
Age
Time from receive
Device
Type of the device
ID
ID number of the device
Signal
Received signal strength
Battery
Battery voltage of the device
Adding new transmitter on screen
Press start button and module list button to start
the application and to open the module list win-
dow.
When application is running Nokeval Radio Data
Receiver module automatically adds all detected
transmitters on the list.
Some of the settings are disabled when appli-
cation is running, therefore its recommended
that when all the transmitters are on the list, the
application is stopped before application building
is continued.
Device type and
serial number
Interface name
and state
Response from
the device
Device
state
Start button
