Nogueira PN-MASTER 3000, Instruction Manual

Page: 11 / 56

11
PN-MASTER 3000
Rack (3)
If the rack (3) is disassembled, assemble it
according next steps:
a) Assemble the rubber cushion (3a) according
detail below, using the bolts (3b) + plain washer
+ spring nut.
b) Assemble the rails (3c) on illustrated position
below, using a bolt on each side (3d) + two plain
w one nut.
c) Install the spindles (3e) according the picture,
using three nuts (3f) on rear part.
NOTE: All the bolts, nuts and washers used in
that assembly which follow the machine.
Installing the Forage Chopper and motor on
the rack
Install the Forage Chopper on the rack (3) and
fasten it with four bolts (4a) + plain washers and
the nuts.
3
3a
3b
3c
3f
3d
3e
two nuts from
the outside
3
4a
E
n
g
li
s
h