Noggin 1000 Smart Cart User Manual Download | Manualshive

Page: 104 / 119

background image

Smart Systems User’s Manual Version 1.1

90

When the calibration distance has been selected follow the directions on the screen:

4)  Set cart at zero and press A
5)  Move the cart the selected distance and press B
6)  Press A to exit.

Odometer calibration values for the Smart Cart odometer should be around 4000.
Odometer calibration values for the Smart Handle odometer should be around 1500.
Odometer calibration values for the Vehicle odometer vary but may be around 50.

6.5.3

Upgrade

This option is used to upgrade the software on the DVL. DO NOT press this button until
told to do so in the instructions accompanying the software upgrade.

6.5.4

System Information

This option can be used to list system information that may be useful to troubleshoot a
problem with the Noggin. The information is intended for the use of Sensors & Software
staff to assist in solving a problem with the Noggin system.

System information can be listed to the screen, printed directly to an attached printer or
transferred to a PC.

To print the information to a printer, attach the printer to the parallel port of the DVL and
then press the B button.

To transfer the information file to a PC, attach the parallel XFER cable from the parallel
port of the PC to the parallel port of the DVL. Then run the WinPXFER program on the
PC (see Section 6.4.1) and press the 1 button.

Sensors & Software technical staff may request that this information be sent to them. A
printed copy of the information can be faxed to Sensors & Software Inc. If the data is
transferred to a PC, the data file can be e-mailed to Sensors & Software Inc.

«
...
102
103
104
105
106
...
»

Summary of Contents for 1000 Smart Cart
























































































































Reviews:

No comments

Related manuals for 1000 Smart Cart

Brand: Buck Rogers Pages: 58

Brand: Logik Pages: 24

Brand: Raymarine Pages: 2

HD Radio HDR-14

Brand: Sangean Pages: 24

Brand: stabo Pages: 32

Brand: Vertex Standard Pages: 72

PUBLIC ALERT WX-200

Brand: First Alert Pages: 16

Brand: Medion Pages: 45

Brand: camry Pages: 52

Brand: Panasonic Pages: 7

Brand: Panasonic Pages: 16

Brand: Alinco Pages: 13

Brand: Tecnet Pages: 16

Gemini 21 RD-21

Brand: Roberts Pages: 28

Brand: Tranzeo Wireless Technologies Pages: 35

Brand: PAC Pages: 9

Brand: Madison Pages: 24

Brand: K40 Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands