31
WPS Status:
Display related system information for WPS. If the wireless security
(encryption) function of the router is properly configured, you can see “
Configured
” chosen.
By default, it is UnConfigured selected.
Self-PIN Number:
it will show the PIN Number of your device.
Push Button Configuration:
click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from wireless clients about two minutes.
The WPS LED on the router will blink fast when WPS is in progress. It will return to normal
condition after two minutes. (You need to setup WPS within two minutes.)
Client Pin Number:
please input the PIN code specified in wireless client you wish to
connect, and click
Start PIN
button. The WPS LED on the router will blink fast when WPS is
in progress. It will return to normal condition after two minutes. (You need to setup WPS
within two minutes)
5.4 Network
This item contains settings for LAN interface,
WAN
interface and WAN Advanced. Only if you set
these
parameters correct, you can make sure your
computers
in your LAN can access Internet. Please follow
the
below
instructions to configure.
5.4.1 LAN Interface
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design
of network structure is related to what type of public IP addresses coming from your ISP.
This page allows you to configure the parameters for LAN which connects to the LAN port
of your Access Point.
Summary of Contents for NG-192
Page 1: ...1 ...
