ES_EN_FR_IT_PT
22
The indications at regulation knob corresponds to the below
approximate water temperatures inside the tank:
Position ‘●’: 15ºC. To avoid water freezing.
Position ‘ECO’: 55ºC approximately. Optimal temperature to
reduce heat loses to environement and reduce scales inside the
appliance in hard water areas.
Position ‘+’: 75ºC. Maximum water temperature inside the tank.
The operation of electric immersion heater is shown by pilot light.
2.- CLEANING.
The external parts of the water heater may be cleaned with a mild
detergent solution. Do not use solvents and abrasives.
Never try to repair any possible faults of the water heater by
yourself, but inform about it the nearest authorised service
workshop.
3.- WATER HEATER DRAIN IN CASE OF FROST
At any risk for freezing of water in the water heater, the water
must be emptied from it. In order to do it, please follow the below
instructions:
o
Unplug the appliance from electrical network.
o
Close the water inlet to the water heater.
o
Drain the water heater using the safety valve..
o
Protect the safety valve from freezing.
o
Fill the water heater before plug in it again to electrical network.
