nodon OCTAN, Tutorial, Page: 8 / 12

Then you should arrive on a menu where you can see a button called “Add
Configuration settings”. Click on it and you should be able to set up a new
configuration setting.
According to the Octan Remote User Guide, below the inputs
- Number: 3
- Data size: 1 byte hex
- Value: 1 (Scene Activation Mode)
Confirm the setting and save it.
2.
Ask VeraEdge to apply your configuration
Go back to the main menu of the Octan Remote and click on the button called
“Advanced”. Go to the tab called “Commands”
Once in the menu, click on “configure node right now”.
Once you receive the confirmation that the VeraEdge got the command, please
wake
up the Octan Remote by pushing any of its buttons
Make sure you are close enough to the VeraEdge while doing this.