Nodka TPC6000-C123-TH-BW5300U, User Manual

Page: 27 / 80

TPC6000-CXX3 User Manual
27
Figure 2-7
：
Arm mounted
To install the TPC6000-CXX3 on the arm, follow the direction below:
Notice: Make sure the arm supports standard VESA mounting. The TPC6000-CXX3
uses a VESA mounting to attach to the arm.
Step 1
：
The arm purchased separately, follow the instructions in the arm’s user
manual to securely attach the arm to the wall.
Step 2
：
Once the mounting arm has been firmly attached to the surface, lift the flat
panel PC onto the interface pad of the mounting.
Step 3
：
Align the retention screw holes on the mounting arm interface with those in
the flat panel PC.
Step 4
：
Secure the flat panel PC to the interface pad by inserting four retention
screws through the bottom of the mounting arm interface pad and into the flat
panel PC.
2.6.2 Wall mounting
To mount the flat panel PC onto the wall, please follow the steps below:
Figure 2-9
：
Wall mounting
Step 1
：
Select the location on the wall for the wall-mounting bracket.