23
SN-03
3. User’s Introduction
SIM card information
When you access, you will get an SIM card which will contain your
information such as PIN no. and available service option.
Install and Take Out SIM Card
1. Power off the phone. Remove the battery cover and unload other
power supply. (If the phone is on, hold and
press
can power on/off.)
2. Insert the SIM card as index map(make sure the metal point face
the phone ).
3. When you need to take out SIM card, power off and then take out
the battery.
Install T-FLASH Memory Card
Switch off the mobile phone, remove battery cover, battery and any
external power source.
Open T-Flash memory card slot and insert correctly memory card.
The usage of charger and battery
• The usage of battery
This phone also had Li-ion battery. After using the first time, you can
reuse it after charging for 4 hours to make sure the best state of the
battery.
1. When removing, please act as follow, A: Remove the battery cover
B: Take up the battery
2. When installing, please act as follow. A: The metal points face to
each other and then press down the battery until it settles down.
3. When the battery is running low, is displayed and a warning signal
is heard.