most of the work. Allow for the short end to drop freely to avoid binding the
blade.
How to cut a frozen bolt with the angle grinder
1.
2.
Mount a cut-off disc onto your angle grinder (see page 15 for a short how-to),
and turn the tool on.
Move the disc through the bolt, flush to concrete. You can brush the cut-off
disc against the surface, but make sure to not cut into it, as that will break the
disc.
How to cut tile, stone or concrete with the angle grinder
1.
2.
3.
4.
Mount a diamond cut-off disc onto your angle grinder (see page 15 for a
short how-to), and turn the tool on.
Mark the outline of the cut accurately both on the front and back of the tile.
Clamp the tile onto your workbench, and score the outline by about 1/8in
deep on the front side of the tile.
Flip the tile over, and cut through it from the back. Extend the cuts slightly
past the lines at the corners to make them crisp and square.
How to sharpen blades with the angle grinder
1.
2.
Mount a grinding disc onto your angle grinder (see page 15 for a short
how-to).
Secure the blade with clamps, so it does not move during sharpening.
17
