4.
When the disc is attached, test-run the grinder at low speed for a few
minutes, not placing the disc against an object. If the disc shows any signs of
being damaged during this test run, replace it immediately.
How to grind with the angle grinder
✔
✔
Only attempt to grind ceramic, steel and stone - not wood or soft metals such
as lead, which will quickly “clog” the grinding disc and make it unusable and
cause damaged.
Grind by moving the angle grinder from side to side in a 10-15
° angle,
applying light yet steady pressure for maximum material removal. There is no
need to use the angle grinder with extreme force, as the weight of the angle
grinder provides sufficient pressure.
How to cut rebar with the angle grinder
1.
2.
3.
Mount a cut-off disc onto your angle grinder (see page 15 for a short how-to),
and turn the tool on.
Prop up the long side of the rebar, and hold it securely.
Move the cutoff disc through the metal, allowing the weight of the tool to do
16
