How to attach the handle
1.
2.
Choose whether you'd like to install the handle on the left or right side of the
angle grinder.
Simply rotate the handle clockwise until it's tight in the angle grinder. Done!
How to attach a grinding/cut-off disc
1.
2.
3.
Place the inner flange disc over the spindle with the locking edges (A) facing
down, and making sure that the disc and spindle's edges meet. The flange
disc must not rotate freely, but follow the rotation of the spindle.
Place the grinding or cut-off disc on the inner flange disc, and align the hole
against the shoulder.
Fit the outer flange disc, and tighten with the tightening key. Press and hold
the spindle lock button (indicated with an arrow in the photo) to prevent the
spindle from rotating during tightening.
15
