background image

4

44

Using 12V Lithium. [Press & Hold]

12V Lithium charge mode is designed for 12-volt 

lithium-ion batteries only, including lithium iron 

phosphate.

CAUTION.

 USE THIS MODE WITH CARE. THIS MODE 

IS FOR 12-VOLT LITHIUM BATTERIES ONLY. LITHIUM-

ION BATTERIES ARE MADE AND CONSTRUCTED 

IN DIFFERENT WAYS AND SOME MAY OR MAY NOT 

CONTAIN A BATTERY MANAGEMENT SYSTEM (BMS). 

CONSULT THE LITHIUM BATTERY MANUFACTURER 

BEFORE CHARGING AND ASK FOR RECOMMENDED 

CHARGING RATES AND VOLTAGES. SOME LITHIUM-

ION BATTERIES MAY BE UNSTABLE AND 

UNSUITABLE FOR CHARGING.

Using 12V AGM+. [Press & Hold]

12V AGM+ charge mode is designed for 12-volt 

advanced AGM batteries only. Advanced AGM batteries 

are a new battery technology typically found in start-stop 

micro-hybrid vehicles. These batteries accept a higher 

than normal charging voltage around 15.5-volts. 12V 

AGM+ charge mode is NOT suitable for traditional AGM 

batteries. Consult the battery manufacturer before using 

this mode.

CAUTION.

 USE THIS MODE WITH CARE. THIS 

MODE IS FOR 12-VOLT LEAD-ACID ADVANCED 

AGM BATTERIES ONLY. THIS MODE USES A HIGH 

CHARGING VOLTAGE AND MAY CAUSE SOME WATER 

LOSS IN WET (FLOODED) CELL BATTERIES OR 

OVERCHARGE IN SOME BATTERIES.

Using 16V Lithium. [Press & Hold]

16V Lithium charge mode is for 16V lithium-ion batteries 

only, including lithium iron phosphate batteries. 16-volt 

lithium-ion batteries are commonly found in racing 

vehicles, where the alternator might be removed, or used 

to improve the performance of the injector or fuel pump. 

CAUTION.

 THIS MODE IS FOR 16-VOLT LITHIUM 

BATTERIES ONLY. LITHIUM-ION BATTERIES ARE 

MADE AND CONSTRUCTED IN DIFFERENT WAYS 

Summary of Contents for G26000
















Reviews: